International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

ALFA IN aXe 500 IN COMPACT-44 H2O synergic MIG/MAG welder, 500 A

The ALFA IN aXe 500 IN COMPACT-44 H2O is a synergic inverter in a compact cabinet, with a built-in wire feeder and water-cooled torch circuit. It is used for MIG/MAG, MMA and arc gouging, and gives 500 A at a 60% duty cycle from a 400 V mains supply.

Brand
ALFA IN
Country of manufacture
Czech Republic
Model
aXe 500 IN COMPACT-44 H2O
Type
synergic inverter, compact version

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Within the aXe 500 IN range this is the compact version: the power source, the wire feeder and the water cooling unit are housed in one 99 kg cabinet. Unlike the GENERATOR version, no separate feeder or connecting cable is needed, so the welder is ready to work once the torch and gas are connected. On request, ALFA IN also supplies this model with a detachable wire feeder or without water cooling.

Control is synergic, with the option of switching to manual mode. The welder has instant access to five stored current values, and the voltage is adjusted smoothly. Gas pre-flow and post-flow, burn-back and the initial wire feed speed are set separately. An electronic choke governs the character of the arc, and the cooling system has an economy mode. The menu supports 2T, 4T and stepped modes, secondary parameters, saving JOB programmes and remote control.

In MMA mode the unit welds coated electrodes up to 5.0 mm in diameter, and at 500 A it can do arc gouging. Modules for 5 or 99 JOB programmes and an MMA electrode module can be fitted. The unit comes with an earth cable, a wire spool adaptor and a gas hose. JOB programmes store a set of parameters for a particular weld, so on repeat work the welder recalls the settings with one action instead of setting the current and voltage again.

The welding current range is 40–500 A. At a 100% duty cycle the unit delivers 420 A, and at 60% it delivers 500 A. The mains supply is three-phase 400 V with 32 A protection. ALFA IN states that the unit complies with CE marking requirements. This compact layout suits fixed welding stations where the operator needs one movable unit with a full set of functions for MIG/MAG and MMA at high currents.

Technical specifications

BrandALFA IN
Country of manufactureCzech Republic
ModelaXe 500 IN COMPACT-44 H2O
Typesynergic inverter, compact version
ProcessesMIG/MAG, MMA, arc gouging
Welding current range40–500 A
Current at 60% duty cycle500 A
Current at 100% duty cycle420 A
Mains voltage400 V
Mains protection32 A
Torch coolingwater (H2O)
Coated electrodesup to 5.0 mm
Programme memory5 or 99 JOB modules
Wire feederbuilt in
Weight99 kg

Part numbers

Show all part numbers (1)

E.070-44H

Request a price and lead time

ALFA IN aXe 500 IN COMPACT-44 H2O synergic MIG/MAG welder, 500 A. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

How does the COMPACT-44 H2O differ from the aXe 500 IN GENERATOR H2O?

In the compact version the wire feeder and water cooling are built into a 99 kg cabinet. The GENERATOR is supplied without a feeder, which is added as a separate PS44 unit with a cable.

What duty cycle applies to the maximum current?

The unit gives 500 A at a 60% duty cycle, and 420 A at 100%.

Can the welder be used for MMA and gouging?

Yes, in MMA mode it welds coated electrodes up to 5.0 mm in diameter, and at 500 A it performs arc gouging.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides