International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

ALFA IN aXe 330 S H2O synergic MIG/MAG and MMA inverter with liquid-cooled torch

The aXe 330 S H2O from ALFA IN is the liquid-cooled version of the aXe 330 S series, with synergic MIG/MAG and manual MMA welding. It suits long periods at high current on carbon and alloy steels and aluminium alloys, with wire from 0.6 to 1.2 mm.

Brand
ALFA IN
Country of manufacture
Czech Republic
Model
aXe 330 S H2O
Processes
MIG/MAG, MMA, flux-cored wire

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The main difference between the aXe 330 S H2O and its neighbour, the aXe 330 S GAS, is liquid cooling of the torch. The cooling unit sits inside the machine, and a separate button on the panel controls the cooling. ALFA IN recommends this version when the welder holds the arc at high current for long periods, where a gas-cooled torch would overheat. The manufacturer offers water-cooled ARC M55W torches in lengths of 4 or 5 m for this model.

Functionally the machine mirrors the aXe 330 S series. In MIG/MAG mode there is full synergy, which adjusts settings to the chosen wire and gas, and a manual mode for welders who prefer to set the arc themselves. Up to ten jobs can be stored and recalled with the JOB button. The process is changed by a button, values are adjusted with two encoders, and secondary parameters open from a separate menu.

The machine welds in a gas mix and in CO2 with wire of 0.6, 0.8, 1.0 and 1.2 mm diameter. Materials include carbon and alloy steels, aluminium alloys and similar metals. Voltage is regulated smoothly, pre-flow, post-flow, burn-back and initial wire speed can all be set, and the choke is electronic. Flux-cored wire can be used after the polarity is changed.

For manual arc welding (MMA), coated electrodes up to 4.0 mm in diameter can be used, so the same unit can finish spots the torch cannot reach.

The four-roller feeder stands on a swivel wheel at the front with a brake that keeps the unit in place. Its interior is illuminated. The manual describes spool loading, roller selection and reconfiguring the feeder for aluminium wire, and gives tables for wire and gas use. The package includes the unit with its four-roller feeder, a mains cable and the manual, and a separate section covers working with jobs and commissioning.

Technical specifications

BrandALFA IN
Country of manufactureCzech Republic
ModelaXe 330 S H2O
ProcessesMIG/MAG, MMA, flux-cored wire
MIG/MAG controlfull synergy or manual mode
Job memory10 jobs
Wire diameterØ 0.6; 0.8; 1.0; 1.2 mm
Materialscarbon and alloy steels, aluminium alloys
Shielding gasgas mix, CO2
MMA electrode diameterup to Ø 4.0 mm
Voltage adjustmentsmooth
Chokeelectronic
Wire feederfour-roller, front swivel wheel with brake, illumination
Torch coolingliquid
Recommended torchARC M55W, 4/5 m
Supplied withfour-roller feeder, mains cable, manual

Part numbers

Show all part numbers (1)

E.147.H

Request a price and lead time

ALFA IN aXe 330 S H2O synergic MIG/MAG and MMA inverter with liquid-cooled torch. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

When should I choose the aXe 330 S H2O over the aXe 330 S GAS?

When long periods at high current are needed, since the H2O version has a liquid-cooled torch.

Which torches fit this machine?

The manufacturer offers water-cooled ARC M55W torches in lengths of 4 or 5 m.

Which wire and electrodes does the unit use?

Wire of Ø 0.6, 0.8, 1.0 and 1.2 mm in a gas mix or CO2, and coated electrodes up to Ø 4.0 mm in MMA mode.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides