
ALFA IN aXe 320 PULSE SMART H2O AL MIG/MAG inverter for aluminium, 315 A
ALFA IN aXe 320 PULSE SMART H2O AL is a synergic MIG/MAG inverter with pulse mode and full aluminium welding support, and it also handles MMA. Its water-cooled torch runs from a 400 V supply and gives 250 A at a 60% duty cycle.
- Brand
- ALFA IN
- Country of manufacture
- Czech Republic
- Model
- aXe 320 PULSE SMART H2O AL
- Type
- synergic pulse inverter
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The water-cooled H2O AL version has a built-in coolant circuit for the torch, and that is what distinguishes it from the GAS AL version. The AL suffix signals full support for aluminium welding in pulse mode. Each unit ships with an earth cable, a gas hose and an adaptor for wire spools of up to 18 kg.
MIG/MAG control can be synergic or manual, and there is a separate synergic programme for aluminium. Six stored current values can be reached quickly. The unit welds well in shielding gas mixtures and in CO2 with wire of 0.6-0.8 mm or 1.0-1.2 mm diameter, on carbon and alloy steels and aluminium alloys. Flux-cored wire is also possible, with a change of polarity. Voltage is adjusted smoothly, gas purge before and after welding, burn-back and the initial wire feed speed can be set, and the electronic choke defines the arc character.
The four-roller feeder has large rolls and an incremental encoder. For aluminium the manufacturer recommends kit 6046, with AL rolls, a liner for the torch hose, a Teflon liner and a support tube for the feeder. Pulse mode switches on with a single button, and a torch with a handle-mounted remote lets you change current, fine-tune the arc and switch JOB programmes. The MMA module handles coated electrodes up to 4.0 mm.
The welding current range is 20-315 A. At 100% duty cycle the source gives 210 A, at 60% it gives 250 A, and 315 A is available at 25%. It runs from a 400 V supply with 16 A mains protection and weighs 26.6 kg. The cooling system has an economy mode. The manual covers setting up the torch cooling circuit and bleeding air from it, adjusting the feeder for other wire diameters or aluminium wire, roller pressure and gas flow. The unit carries the CE mark.
Technical specifications
| Brand | ALFA IN |
|---|---|
| Country of manufacture | Czech Republic |
| Model | aXe 320 PULSE SMART H2O AL |
| Type | synergic pulse inverter |
| Processes | MIG/MAG (synergic, manual, pulse), MMA |
| Welding current range | 20-315 A |
| Current at 25% duty cycle | 315 A |
| Current at 60% duty cycle | 250 A |
| Current at 100% duty cycle | 210 A |
| Mains voltage | 400 V |
| Mains protection | 16 A |
| Wire diameter | 0.6-0.8 mm, 1.0-1.2 mm |
| MMA electrodes | up to 4.0 mm |
| Torch cooling | water (H2O) |
| Wire feeder | four-roller |
| Weight | 26.6 kg |
Part numbers
Show all part numbers (1)
E.106H
Request a price and lead time
ALFA IN aXe 320 PULSE SMART H2O AL MIG/MAG inverter for aluminium, 315 A. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Can aluminium be welded without modifying the feeder?
The unit has a synergic programme for aluminium, but for the feeder and torch the manufacturer recommends kit 6046 with AL rolls and a Teflon liner.
What current is available in continuous operation?
210 A at 100% duty cycle, 250 A at 60%, and a maximum of 315 A at 25%.
Which wire and electrodes are suitable?
Wire of 0.6-0.8 mm or 1.0-1.2 mm, including flux-cored wire, and coated electrodes up to 4.0 mm in MMA mode.
Similar equipment from other manufacturers






