International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

ALFA IN aXe 320 PULSE SMART GAS AL MIG/MAG inverter for aluminium, 315 A

ALFA IN aXe 320 PULSE SMART GAS AL is a gas-cooled synergic MIG/MAG inverter with pulse mode and full aluminium welding support, and it also handles MMA. It runs from a 400 V supply and gives 250 A at a 60% duty cycle.

Brand
ALFA IN
Country of manufacture
Czech Republic
Model
aXe 320 PULSE SMART GAS AL
Type
synergic pulse inverter

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The GAS AL version cools its torch with shielding gas, so it needs no coolant circuit. Apart from the cooling method, which is the difference from the H2O AL version, its aluminium and pulse functions are the same. The AL suffix means full support for aluminium welding. An earth cable, a gas hose and an adaptor for wire spools of up to 18 kg come with the unit.

You can work in synergic or manual MIG/MAG mode, and a dedicated synergic programme covers aluminium. Six current values can be stored for fast access. The unit welds in gas mixtures and in CO2 with wire of 0.6-0.8 mm or 1.0-1.2 mm diameter, covering carbon and alloy steels as well as aluminium alloys. Flux-cored wire can be used with a change of polarity. Voltage is adjusted smoothly, the gas purge before and after welding, burn-back and the starting wire feed speed are all adjustable, and the electronic choke sets the character of the arc.

The four-roller feeder has large rolls and an incremental encoder. For aluminium the manufacturer recommends kit 6046, which contains AL rolls, a liner for the torch hose, a Teflon liner and a support tube for the feeder. A single button switches pulse mode on, and a torch with a handle-mounted remote lets you change current, fine-tune the arc and switch JOB programmes. The MMA module handles coated electrodes up to 4.0 mm.

The welding current range is 20-315 A. At 100% duty cycle the source gives 210 A, at 60% it gives 250 A, and 315 A is available at 25%. It runs from a 400 V supply with 16 A mains protection and weighs 26.6 kg. The manual explains how to adjust the feeder for another wire diameter or for aluminium wire, how to set roller pressure and how to set gas flow. The unit carries the CE mark.

Technical specifications

BrandALFA IN
Country of manufactureCzech Republic
ModelaXe 320 PULSE SMART GAS AL
Typesynergic pulse inverter
ProcessesMIG/MAG (synergic, manual, pulse), MMA
Welding current range20-315 A
Current at 25% duty cycle315 A
Current at 60% duty cycle250 A
Current at 100% duty cycle210 A
Mains voltage400 V
Mains protection16 A
Wire diameter0.6-0.8 mm, 1.0-1.2 mm
MMA electrodesup to 4.0 mm
Torch coolinggas (GAS)
Wire feederfour-roller
Weight26.6 kg

Part numbers

Show all part numbers (1)

E.106

Request a price and lead time

ALFA IN aXe 320 PULSE SMART GAS AL MIG/MAG inverter for aluminium, 315 A. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Does the GAS AL version need a coolant circuit?

No, its torch is cooled by shielding gas, so no coolant is needed.

What current is available at a 60% duty cycle?

250 A at 60%, 210 A at 100%, and 315 A at 25%.

Which wire and electrodes suit this unit?

Wire of 0.6-0.8 mm or 1.0-1.2 mm, including flux-cored wire, and coated electrodes up to 4.0 mm in MMA mode.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides