
ALFA IN aXe 260 MIG MAN mid-range manual MIG/MAG welder, wire 0.6-1.2 mm
The aXe 260 MIG MAN is the middle model of the ALFA IN aXe MIG MAN series for manual semi-automatic MIG/MAG welding. It suits workshop and repair work on carbon and stainless steel and aluminium alloys, with wire from 0.6 to 1.2 mm.
- Brand
- ALFA IN
- Country of manufacture
- Czech Republic
- Model
- aXe 260 MIG MAN
- Process
- MIG/MAG
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The aXe 260 MIG MAN sits in the ALFA IN line between the smaller aXe 230 and the larger aXe 330 MIG MAN. All three machines share the same panel, the same four-roller wire feeder and the same wire range, so the choice comes down to how much power is needed. The mid-sized model is usually chosen for a general workshop that welds both thin sheet and medium-thickness parts, where the larger model would be more machine than the job needs.
Control is entirely manual, as the MAN designation indicates. The welder sets wire feed speed and arc voltage with two potentiometers, and a third potentiometer adjusts the choke. Voltage is regulated smoothly without steps, and electronic setting of the inductance allows a softer arc for thin metal or a firmer arc for deeper penetration.
The machine welds under a gas mix and under CO2, and the manufacturer notes good welding properties with both gases. It is used on carbon and stainless steels, aluminium alloys and similar materials. Wire diameters of 0.6, 0.8, 1.0 or 1.2 mm are supported, and the feed rollers are chosen to suit the diameter and material. Gas preheating can be fitted to order.
The seam is controlled at both start and finish. Gas pre-flow protects the area before striking, the approach speed setting gives a soft start, crater fill closes the end of the seam, and burn-back plus adjustable post-flow stop the wire sticking and shield the cooling metal. A 2T/4T switch allows long seams to be run without holding the torch button.
The displays show set current or wire speed, and voltage; a yellow indicator signals overheating. The fan runs in economy mode. The package includes the inverter with its feeder, a mains cable and the operating manual, which separately covers workplace safety, operating conditions and electromagnetic compatibility.
Technical specifications
| Brand | ALFA IN |
|---|---|
| Country of manufacture | Czech Republic |
| Model | aXe 260 MIG MAN |
| Process | MIG/MAG |
| Control | manual (MAN) |
| Wire diameter | Ø 0.6; 0.8; 1.0; 1.2 mm |
| Materials | carbon and stainless steels, aluminium alloys |
| Shielding gas | gas mix, CO2 |
| Voltage adjustment | smooth |
| Choke | electronic setting |
| Functions | crater fill, pre-flow, approach speed, burn-back, adjustable post-flow, 2T/4T |
| Wire feed mechanism | four-roller |
| Cooling | economy mode |
| Options | gas preheating |
| Supplied with | inverter with four-roller feeder, mains cable, manual |
Part numbers
Show all part numbers (1)
E.142
Request a price and lead time
ALFA IN aXe 260 MIG MAN mid-range manual MIG/MAG welder, wire 0.6-1.2 mm. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Which thickness is the aXe 260 MIG MAN for?
It is the middle model between the aXe 230 and aXe 330 MIG MAN, for workshop jobs on thin and medium-thickness metal with 0.6-1.2 mm wire.
How is the arc set?
By hand: wire feed speed and voltage are set with potentiometers, voltage is regulated smoothly, and the choke is adjusted electronically.
Which metals can I weld?
Carbon and stainless steels and aluminium alloys, under a gas mix or CO2.
Similar equipment from other manufacturers






