International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

ALFA IN aXe 230 MIG MAN compact manual MIG/MAG welder, wire 0.6-1.2 mm

The aXe 230 MIG MAN is the entry model of the ALFA IN manual semi-automatic line. It is intended for repairs, workshops and light steel structures in carbon and stainless steel and aluminium alloys, with wire from 0.6 to 1.2 mm.

Brand
ALFA IN
Country of manufacture
Czech Republic
Model
aXe 230 MIG MAN
Process
MIG/MAG

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Of the three machines in the aXe MIG MAN range, the aXe 230 MIG MAN is the junior model. Its functions, panel and wire range match those of the aXe 260 and aXe 330 MIG MAN, so a welder used to the larger machines can move to this one without retraining. The entry model is chosen for a workshop, repair service or section where thin and medium-thickness metal is welded and a large power reserve is not needed.

The unit works by MIG/MAG and, according to the manufacturer, has good welding properties in both a gas mix and CO2. It welds carbon and stainless steels and aluminium alloys with wire of 0.6, 0.8, 1.0 and 1.2 mm. Thin sheet is well served by 0.6 and 0.8 mm wire, while thicker parts call for 1.0 or 1.2 mm wire with the feed rollers changed.

Control is manual. The left potentiometer sets wire feed speed and the right one sets voltage, which is regulated smoothly. A separate potentiometer adjusts the choke, and electronic changes to the inductance make the arc softer or firmer. A button selects 2T or 4T mode, and there are buttons for gas check, wire threading and access to the secondary parameters.

The secondary parameters include pre-flow, approach speed, burn-back and adjustable post-flow, along with the crater fill function. These settings remove porosity at the start and the crater at the end of the seam. Gas preheating is fitted to order.

The feeder has four rollers. Indicators on the panel show power on and overheating, and the fan runs in economy cooling mode. The inverter is supplied with the feeder, a mains cable and the manual, while the torch and earth lead are ordered separately. Specifications, accessories and safety rules are in the joint manual for the aXe 230, 260 and 330 MIG MAN.

Technical specifications

BrandALFA IN
Country of manufactureCzech Republic
ModelaXe 230 MIG MAN
ProcessMIG/MAG
Controlmanual (MAN)
Wire diameterØ 0.6; 0.8; 1.0; 1.2 mm
Materialscarbon and stainless steels, aluminium alloys
Shielding gasgas mix, CO2
Voltage adjustmentsmooth
Chokeelectronic setting
Functionscrater fill, pre-flow, approach speed, burn-back, adjustable post-flow, 2T/4T
Wire feed mechanismfour-roller
Coolingeconomy mode
Optionsgas preheating
Supplied withinverter with four-roller feeder, mains cable, manual

Part numbers

Show all part numbers (1)

E.144

Request a price and lead time

ALFA IN aXe 230 MIG MAN compact manual MIG/MAG welder, wire 0.6-1.2 mm. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

How does the aXe 230 MIG MAN differ from the larger models?

It is the junior model of the series. Its functions, panel and 0.6-1.2 mm wire range are the same as on the aXe 260 and aXe 330 MIG MAN.

Which parameters are set by hand?

Wire feed speed, voltage with smooth regulation, the choke, plus pre-flow, approach speed, burn-back and crater fill.

Can I weld aluminium?

Yes, the manufacturer lists aluminium alloys alongside carbon and stainless steels.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides