International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

ALFA IN aXe 201 MIG LCD single-phase MIG/MAG, MMA and TIG inverter, 200 A

ALFA IN aXe 201 MIG LCD is a single-phase multi-process inverter for MIG/MAG, MMA and TIG with contact ignition. It runs from a 230 V supply and gives 170 A at a 60% duty cycle, which suits bodywork repair.

Brand
ALFA IN
Country of manufacture
Czech Republic
Model
aXe 201 MIG LCD
Type
single-phase multi-process inverter

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The aXe 201 MIG LCD stands out in the ALFA IN range for its single-phase 230 V supply and digital control with a liquid crystal display. The screen shows actual current and voltage during MIG welding. The manufacturer explicitly recommends the model for bodywork, and with three processes the same unit also serves repair workshops for electrode and TIG work. A set of synergic programmes simplifies settings for a welder without much experience.

In MIG/MAG mode, welding runs in two-stroke or four-stroke operation, either manually or with synergic programmes. The unit works with G3Si1 wire or stainless wire of 0.6-1.0 mm diameter, aluminium wire of 1.0 mm, and flux-cored wire with or without shielding gas, with polarity changed accordingly. The four-roller feeder takes large spools, so a spool needs replacing less often during long work.

MMA mode covers coated electrodes up to 4.0 mm, and TIG uses Lift ARC contact ignition. The main menu gives access to welding parameters, the choice of synergic programmes and secondary settings, while buttons and an encoder select and confirm values. The unit carries an S mark, so it can be used in rooms with an increased risk of electric shock, and it meets CE marking requirements.

Current ranges from 25 to 200 A. At 100% duty cycle the source gives 140 A, at 60% it gives 170 A, and 200 A is available at 35%. Mains protection is 16 A and the weight is 44.5 kg. The package under article 5.0318 includes the inverter, a mains cable, a gas hose, an earth cable and an operating manual. The ALFA IN manual also describes preparing the unit for MIG/MAG, TIG and MMA modes, plus servicing and checks.

Technical specifications

BrandALFA IN
Country of manufactureCzech Republic
ModelaXe 201 MIG LCD
Typesingle-phase multi-process inverter
ProcessesMIG/MAG (2T/4T, manual and synergic), MMA, TIG Lift ARC
Welding current range25-200 A
Current at 35% duty cycle200 A
Current at 60% duty cycle170 A
Current at 100% duty cycle140 A
Mains voltage230 V
Mains protection16 A
WireG3Si1 and stainless 0.6-1.0 mm, aluminium 1.0 mm, flux-cored
MMA electrodesup to 4.0 mm
Wire feederfour-roller
Weight44.5 kg
Kitinverter, mains cable, gas hose, earth cable, manual

Part numbers

Show all part numbers (1)

5.0318

Request a price and lead time

ALFA IN aXe 201 MIG LCD single-phase MIG/MAG, MMA and TIG inverter, 200 A. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Can the unit run from a domestic mains supply?

Yes, the aXe 201 MIG LCD is single-phase, runs from a 230 V supply and has 16 A mains protection.

Which wire can be used for bodywork?

G3Si1 or stainless wire of 0.6-1.0 mm, aluminium wire of 1.0 mm, and flux-cored wire with or without shielding gas.

What duty cycle does the unit have?

140 A at 100% duty cycle, 170 A at 60% and 200 A at 35%.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides