
Orbitalum DVR-M welding turntable for TIG welding of pipes, 9.53–230.00 mm
The Orbitalum DVR-M turns a pipe, fitting or flange under a fixed TIG torch and tilts from 0° to 90°. It handles outside diameters of 9.53–230.00 mm and suits series welding of parts that an orbital head cannot weld. It is compatible with Mobile Welder, Smart Welder and Power Welder power sources.
- Brand
- Orbitalum
- Type
- welding turntable
- Country of manufacturer
- Germany
- Pipe outer diameter
- 9.53 mm–230.00 mm (0.375–9.055 in)
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The Orbitalum DVR-M welding turntable rotates the workpiece under a stationary TIG torch and welds in both rotation directions. It is made by Orbitalum Tools GmbH in Zingen, Germany. The turntable takes outside pipe diameters from 9.53 mm to 230.00 mm (0.375 – 9.055 in).
A hollow shaft 72 mm in diameter gives access to the inside of the part. Shielding gas can be fed through it for purging, and long workpieces can be clamped through it. That makes the DVR-M suitable for fittings, flanges and bent or pressed parts, which are hard or impossible to weld with an orbital head.
The turntable tilts from 0° to 90° in 22.5° steps, so welds can be made in both horizontal and vertical positions. The TIG torch aligns precisely and is readjusted without tools. Several identical parts can be welded on one set-up, which cuts changeover time and errors. For serial production where consistent weld quality matters, this is the main advantage.
The torch assembly slides along the frame, so for a different tube length the assembly is shifted rather than the whole fixture rebuilt, which suits prefabrication areas and pre-assembly. The control keypad is built into the frame, keeping every control within the operator's reach. The unit is compact, set up on an installation site and cleared away afterwards. A reusable stackable case, handled by forklift or hand trolley, covers transport. The DVR-M works with Mobile Welder, Smart Welder and Power Welder sources, including the Mobile Welder OC Plus and Smart Welder Plus.
Orbitalum lists these applications: aerospace, semiconductors, pharmaceutical and biotech, heat exchanger manufacturing, food and beverage, renewable energy, and cooling systems for data centres. In all of them, repeatable TIG welds on pipes, flanges and fittings matter.
Technical specifications
| Brand | Orbitalum |
|---|---|
| Type | welding turntable |
| Country of manufacturer | Germany |
| Pipe outer diameter | 9.53 mm–230.00 mm (0.375–9.055 in) |
| Hollow shaft diameter | 72 mm (2.835) |
| Turntable tilt angle | 0°–90° in 22.5° steps |
| Welding direction | both directions |
| Torch set-up | TIG torch, tool-free; movable torch assembly |
| Controls | keypad built into the frame |
| Compatible power sources | Mobile Welder, Smart Welder, Power Welder series (Mobile Welder OC Plus, Smart Welder Plus) |
| Transport | reusable stackable case; forklift or trolley |
Request a price and lead time
Orbitalum DVR-M welding turntable for TIG welding of pipes, 9.53–230.00 mm. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Which pipe diameters does the DVR-M weld?
The outside diameter ranges from 9.53 mm to 230.00 mm (0.375–9.055 in), and the hollow shaft is 72 mm in diameter.
Which power sources does the turntable work with?
The DVR-M is compatible with Orbitalum Mobile Welder, Smart Welder and Power Welder series sources, including the Mobile Welder OC Plus and Smart Welder Plus.
Can it weld in the vertical position?
Yes, the turntable tilts from 0° to 90° in 22.5° steps, so both horizontal and vertical positions are available.
Similar equipment from other manufacturers






